MAF DBA Premium Rotors

Toll Free Orders Only: 877-626-2373
Customer/Technical Service: 805-578-8712

The Man-A-Fre Company is the oldest Toyota Land Cruiser parts distributor in the world. We pride ourselves in providing the newest technologies and the highest quality parts, while maintaining low prices and excellent customer service. Our parts and accessories are available for the FJ40, FJ55, FJ60, FJ62, FJ80, UZJ100 Land Cruiser series and Lexus LX450/LX470 series.

DISC BRAKES AUSTRALIA PREMIUM BRAKE ROTORS

The best brake rotors available for your Land Cruiser? Yes, Disc Brakes Australia makes the best performing, highest quality direct replacement rotors you can buy at any price for your Land Cruiser.
These rotors are available in various configurations to suit your performance needs, styling, and budget. From the competition level 4000 series, to the Long Life Slotted , all DBA rotors will provide a noticeable improvement in braking capability and longevity over any comparable rotor. But why are they so good? Let's go over the details.

Kangaroo Paw Cooling System
First is the most obvious, DBA's exclusive, patented "Kangaroo Paw" cooling system found on their ventilated rotors. Other ventilated rotors use vanes(curved or straight) that allow for hollow tubes
through the center of the rotor for air flow to help cool them down. The 2 sides of the rotor are "pinned" or held together by these vanes. As the brakes are applied and the rotor heats up the area
where the rotors are not pinned expands more than the pinned area, creating DTV(Disc Thickness Variation) which can lead to chattering or shaking. On DBA ventilated rotors with the "Kangaroo Paw" cooling system there are 144 strategically shaped and located pillars, instead of vanes. The pillars closest to the center of the hub where air enters the rotor are shaped like an impeller pump blade, and actually pump the air through the rotor. These pillars provide more surface area than straight vanes and are located in order to maximize air contact, and heat transfer. This allows DBA rotors to run 20% cooler than a standard vane rotor in similar braking conditions. Another benefit of these pillars is that it spreads the "pinning" of the 2 sides of the rotor evenly. This delivers a much stronger rotor, with extreme resistance to DTV and warping.

Quality of Manufacture
DBA rotors are cast and machined in Australia under the control of a single family run business. Other manufacturers will often have their casting made in a third world country, and then machine these castings in the USA to keep costs down. DBA controls the exact materials content in their castings, the cool down procedure, and quality testing. This is why DBA rotors have a runout measured in Microns, not thousandths of an inch.

Slotting
Slotting on the contact surface of the rotor increases pad bite,helps reduce fade and delivers exceptional braking performance. Slots continually de-glaze the brake pads, improving efficiency and
reducing rotor scoring. Slots also help dissipate water when driving in poor weather, as well as pump away dust and dirt.

Cross Drilling
Cross Drilling rotors adds a high performance look to your vehicle, and aids in expelling friction gases. Cross drilling must be done very carefully not to weaken the structural integrity of the rotor.
DBA does all cross drilling in house, and is careful not to take off too much material, which would result in a lower mass, and corresponding loss of heat transfer ability. Cross Drilling is not
recommended for track or competition applications.

TSP Thermal Stress Profiling
DBA 4000 series rotors go through an additional process during manufacture called TSP or Thermal Stress Profiling, which through the controlled application of high heat and cool down after machining,
stabilizes the molecular structure of the rotor. This yields a rotor that is extremely resistant to warping and damage from high heat loads associated with repeated heavy braking. DBA 4000 series brake rotors are the highest level, direct replacement performance rotors available for your Land Cruiser.

Thermo-Graphic Paint
DBA 4000 series rotors have been painted on the outer edge with heat sensitive color stripes that change color as certain core temperatures are achieved.

Direct Replacement, No Mods Required
Best of all DBA rotors are made as direct replacement units. Installation of these high performance brake rotors requires no modifications to your vehicle, and install exactly in the same manner
as OEM rotors.

MAN-A-FRE STRONGLY RECOMMENDS YOU READ THE INFORMATION LISTED BELOW
PRIOR TO PLACING AN ORDER ONLINE.

ONLINE ORDERS*
After placing an order online, you will receive a copy of your order by email from our shopping cart service only. It does not confirm that we have a copy of your order until your credit card info has been verified and confirmed. Your order will be rejected if the credit card information is incorrect. Once we confirm the status of your credit card, a customer and quote number will be sent to you by email including your order within 24 hours (except for orders placed Friday after 5:00 p.m. and the weekends including the holidays). If you do not receive a confirmation email with quote and customer number after 48 hours of placing the order, you will need to email orders@man-a-re.com and notify us.

It is your responsibility to make sure that all information is accurate. Man-A-Fre is not responsible for typographical errors or incorrect items entered in our online ordering system.

SHIPPING NOTICE*
To obtain shipment information or tracking number of your order, email orders@man-a-fre.com

Please be aware that all orders selected for expedited shipping are not 100% guaranteed to leave the same day. The order may be received too late in the day or a product may not be in stock. If you absolutely need a part as quick as possible, please call us at 805-578-8712 to place the order.

***UPS and FEDEX SHIPMENT ONLY***
UPS and FedEx shipment delivery require a SIGNATURE. You must be present or somebody to sign for the this package. If you're unable to sign for the package, you need to submit a NO SIGNATURE REQUIRED RELEASE FORM. Click this link, http://www.man-a-fre.com/contact/nsrrf.htm to obtain form. Print it, fill it out and fax it to 805-578-8762 or you can scan it and email to cris@man-a-fre.com . This form must be received prior to shipping your order. You will be responsible for all re-shipment charges.

***FOR TRUCK FREIGHT SHIPMENT ONLY***
This email is to inform you that we have received your order, entered it in our system, given a customer and quote .If you need to change or cancel this order, you have to notify us immediately by calling 805-578-8712 and reference the customer and quote number listed above.
All truck shipment delivery requires a SIGNATURE.

INTERNATIONAL/FOREIGN ORDERS*
Before we can process your order, we require all customers ordering from outside the United States to fill out the Credit Card Authorization Form. This protects you and Man-A-Fre from credit card fraud. Click this link, http://www.man-a-fre.com/contact/ccaf.htm Print it, fill it out completely including a photocopy of your driver's license and credit card and fax to 805-578-8762. If you are unable to fax this form, you can scan the document or take a digital picture and send it as an attachment and email to orders@man-a-fre.com. We cannot process your order until we receive this form. Thank you.

TERMS AND CONDITIONS*
Upon placing an order, you agree to Man-A-Fre's TERMS AND CONDITIONS.

***Prices subject to change without notice***

TOYOTA", "LAND CRUISER" is a registered trademark of Toyota Motor Corporation. MAN-A-FRE is not affiliated with, or endorsed, sponsored, or supported by, Toyota Motor Corporation, Toyota Motor Sales, U.S.A., Inc. or any of Toyota's affiliated companies. These terms are used for descriptive purposes only, and not to denote affiliation or connection with Toyota Motor Corporation.