A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



 

  SAGINAW STEERING CONVERSION COMPONENTS

If you want to put together your own Saginaw kit, or you already have a Saginaw steering conversion, but want to upgrade to higher quality parts or need to repair your system, we offer the following high quality components for your requirements. All components are for 40
series only unless otherwise noted.


Borgesen Super Heavy Duty Telescoping Shaft
Advance Adapter Spud Shaft
4+PLUS "Close" Spud Shaft Clamp

Steering Column Mounting Plate
Steering Shaft Support Bearings
4+Plus Saginaw P/S Box Mounting Plate
4+Plus Saginaw Pump Bracket for F/2F Engines
4+Plus Saginaw Pump Pulley, Wide Groove
Saginaw Pitman Arm
Saginaw Relay Rods
Saginaw Relay Rod End
Saginaw P/S Hose Kit

Borgesen Super
Heavy Duty
Telescoping Shaft
Saginaw
P/S Hose Kit
ADVANCE ADAPTER SAGINAW RELAY ROD SAGINAW BOX
BRACKET
4+Plus Saginaw
P/S Box Mounting Plate
Saginaw
Pitman Arm
Saginaw Relay Rods Steering Shaft Support Bearings 4+PLUS "Close" Spud Shaft Clamp Advance Adapter Spud Shaft
     
4+Plus Saginaw Pump Bracket Saginaw Pulley      

 


Borgesen Super Heavy Duty Telescoping Shaft  


This is the heaviest duty telescoping steering shaft available for your Land Cruiser Saginaw steering conversion. With oversized needle bearing U-joints this telescoping shaft is ideal for large tires, long travel suspensions, and easily accommodates the body flex inherent in FJ40's when off-roading. 36" in length w/a 36 spline lower U-joint, and 3/4" upper to easily mate to your modified stock steering shaft, and Advance Adapters lower spud shaft.

 

PART NO. DESCRIPTION
***Prices subject to change without notice***
Shipping/handling charges are not included in the cost of parts and will be added when order is shipped
ITEM PRICE
*does not include freight*
 
991-36 BORGESEN SUPER HEAVY DUTY TELESCOPING SHAFT $306.95

Advance Adapter Spud Shaft

This is what connects your Saginaw power steering box to your steering shaft and passes through the front frame cross brace. 36 spline.

 
PART NO. DESCRIPTION
***Prices subject to change without notice***
Shipping/handling charges are not included in the cost of parts and will be added when order is shipped
ITEM PRICE
*does not include freight*
 
716835 ADVANCE ADAPTER SPUD SHAFT $108.95

4+PLUS "Close" Spud Shaft Clamp

The Advance Adapters spud shaft comes with it's own clamp. For installations where the steering box is located closer to the frame cross brace this special thin clamp(9/16" wide vs 1-1/8" standard. See comparison at left ) allows for easier clearance of front bumpers and bull bars, while minimizing need for a large hole in the cross brace.
 
PART NO. DESCRIPTION
***Prices subject to change without notice***
Shipping/handling charges are not included in the cost of parts and will be added when order is shipped
ITEM PRICE
*does not include freight*
 
PDCLAMP 4PLUS CLOSE SPUD SHAFT CLAMP $13.69

Steering Column Mounting Plate

On pre 9/1972 FJ40's it is necessary to remount the steering column to a new firewall plate. To accomplish this we offer our 4+Plus column plate that is predrilled, and features a slotted opening to allow for
angle changes in the steering column. For those that prefer to do their own drilling, and fabricating, we offer the Advance Adapters column plate. Both plates are 3/16" steel.

 
PART NO. DESCRIPTION
***Prices subject to change without notice***
Shipping/handling charges are not included in the cost of parts and will be added when order is shipped
ITEM PRICE
*does not include freight*
 
COLPLT 4+PLUS STEERING COLUMN MOUNTING PLATE $29.00
716822 ADVANCE ADAPTER STEERING COLUMN MOUNTING PLATE $19.84

Steering Shaft Support Bearings

Three choices here depending on vehicle production date, and preference. On pre 9/1972 vehicles you will use a column plate and either a bushing or bearing pressed into the end of the OEM tube to support the steering shaft after cutting it. On 10/1972-1984 vehicles a mounting plate w/integral bearing mounts to the firewall and supports the OEM steering shaft.
 
PART NO. DESCRIPTION
***Prices subject to change without notice***
Shipping/handling charges are not included in the cost of parts and will be added when order is shipped
ITEM PRICE
*does not include freight*
 
716811 STEERING SHAFT BUSHING E-9/72 $26.46
150-080 STEERING SHAFT SUPPORT BEARING E-9/72 $4.95
716833 STEERING SHAFT PLATE WITH BEARING 10/72 $49.95

4+Plus Saginaw P/S Box Mounting Plate


Our 4+Plus Saginaw power steering box mounting plate is designed to be welded to the left front frame rail, and provide for optimal location of your steering box. Made of 3/8" plate steel this unit is
compatible w/shackle reversal kits and 3 or 4 boss mounting flange boxes.
 
PART NO. DESCRIPTION
***Prices subject to change without notice***
Shipping/handling charges are not included in the cost of parts and will be added when order is shipped
ITEM PRICE
*does not include freight*
 
REN101 4PLUS SAGINAW POWER STEERING MOUNTING PLATE $59.00

4+Plus Saginaw Pump Bracket for F/2F Engines

The ultimate Saginaw Power steering pump bracket for use with an F/2F Land Cruiser 6 cylinder engine. Mounts to the 2 left front cylinder head bolts and securely carries a saginaw pump for either stock
upgrades or Saginaw conversions. Built to 4+Plus standards this bracket is made of 1/4" plate steel, and features an OEM type adjusting slot. "F" engines will need to change air cleaner or relocate.
 
PART NO. DESCRIPTION
***Prices subject to change without notice***
Shipping/handling charges are not included in the cost of parts and will be added when order is shipped
ITEM PRICE
*does not include freight*
 
40-4152 4PLUS SAGINAW PUMP BRACKET FOR F AND 2F ENGINES $169.95

4+Plus Saginaw Pump Pulley, Wide Groove


When running a Saginaw Power steering pump on a Land Cruiser 6 cylinder, most pulleys available for the Saginaw pump are designed for the thin V-8 type belts and will not properly fit the wide Land Cruiser belt.
We now offer a 4+Plus CNC machined billet aluminum Saginaw pulley with a groove width to match stock Land Cruiser belts. Will only fit Saginaw pumps with key type shafts.
 
PART NO. DESCRIPTION
***Prices subject to change without notice***
Shipping/handling charges are not included in the cost of parts and will be added when order is shipped
ITEM PRICE
*does not include freight*
 
SAGPULLEY 4PLUS SAGINAW PUMP PULLEY WIDE GROOVE $99.00

Saginaw Pitman Arm

Available in either a straight version for vehicles w/0-2" of lift, and a 2" drop version for vehicles with 2" or more of lift. To use these you will have to convert to the special saginaw relay rod end and relay rod we
offer. Lock washer and nut to secure arm to steering box sold separately
 
PART NO. DESCRIPTION
***Prices subject to change without notice***
Shipping/handling charges are not included in the cost of parts and will be added when order is shipped
ITEM PRICE
*does not include freight*
 
716817 0-2 INCH LIFT PITMAN ARM $95
52040112 2 INCH PITMAN ARM $35
5697702 LOCK WASHER $2.95
5667628 NUT $6.95

Saginaw Relay Rods

These relay rods have one end that is threaded to accept an OEM type metric lower relay rod end, and an upper American thread special relay rod end that fits our pitman arms. The relay rod from Advance Adapters is standard tubing, and 26-3/4" long. The relay rod from 4+Plus is thick wall DOM(Drawn Over Mandrel) tubing and 27-1/2" long to accommodate lifted suspensions.
 
PART NO. DESCRIPTION
***Prices subject to change without notice***
Shipping/handling charges are not included in the cost of parts and will be added when order is shipped
ITEM PRICE
*does not include freight*
 
716831 ADVANCE ADAPTER SAGINAW RELAY ROD $48.00
SAGRELAY 4PLUS SAGINAW RELAY ROD $62.95


Saginaw Relay Rod End


This is the special Heavy Duty Relay Rod End needed to adapt the Saginaw pitman arm to the special relay rod.
 
PART NO. DESCRIPTION
***Prices subject to change without notice***
Shipping/handling charges are not included in the cost of parts and will be added when order is shipped
ITEM PRICE
*does not include freight*
 
716821 STANDARD VERSION SAGINAW RELAY ROD END $18.95
716821-HD HEAVY DUTY SAGINAW RELAY ROD END $64.50


Saginaw P/S Hose Kit

High pressure Steel Braided feed hose, and low pressure return lines for connecting your saginaw pump to your box.
 
PART NO. DESCRIPTION
***Prices subject to change without notice***
Shipping/handling charges are not included in the cost of parts and will be added when order is shipped
ITEM PRICE
*does not include freight*
 
MM-PS1 SAGINAW P/S HOSE KIT $119.00

MAN-A-FRE ORDERING TERMS
Upon placing an order, you agree to Man-A-Fre's ORDERING TERMS


The Man-A-Fre Company is the oldest Toyota Land Cruiser parts distributor in the world.  We pride ourselves in providing the newest technologies and the highest quality parts, while maintaining low prices and excellent customer service. Our parts and accessories are available for the FJ Cruiser, FJ40, FJ55, FJ60, FJ62, FJ80, UZJ100 Land Cruiser series and Lexus LX450/LX470 series.


Copyright © Man-A-Fre, Inc.
Advanced Off-Road Solutions
All Rights Reserved.


TOYOTA", "LAND CRUISER" is a registered trademark of Toyota Motor Corporation. MAN-A-FRE is not affiliated with, or endorsed, sponsored, or supported by, Toyota Motor Corporation, Toyota Motor Sales, U.S.A., Inc. or any of Toyota's affiliated companies. These terms are used for descriptive purposes only, and not to denote affiliation or connection with Toyota Motor Corporation.


GOT CRUISER? - LAND CRUISER & FJ CRUISER APPAREL ACCESSORIES
www.gotcruiser.com