Toll Free Orders Only: 877-626-2373 Customer/Technical Service: 805-578-8712 sales1@man-a-fre.com |
![]() The Man-A-Fre Company is the oldest Toyota Land Cruiser parts distributor in the world. We pride ourselves in providing the newest technologies and the highest quality parts, while maintaining low prices and excellent customer service. Our parts and accessories are available for the FJ40, FJ55, FJ60, FJ62, FJ80, UZJ100 Land Cruiser series and Lexus LX450/LX470 series. |
|
One of the most versatile tools ever made! If you've ever had a flat while off-roading, you know that the factory jack is marginal at best, and if you have limited clearance between the axle and the ground, the factory jack just won't do. With this quality, American-made, Hi-Lift Jack, changing a flat is easy-even if there is no clearance between the axle and the ground. This jack can be put under a bumper that is almost touching the ground and will raise the end of a heavily loaded vehicle to a height of 4 feet. This gives you the lift you need to get a vehicle off high center, fill voids, dig out sand or mud, put on chains, change a tire, or put a vehicle on jack stands for servicing or repairs. But that's only part of what you can do with this highly versatile tool. It can also be used as an in-line winch for pulling out stuck vehicles, as a hoist for lifting, as a clamp and with the optional firewood splitter to split wood. We've even seen one used to break the bead on a tire to repair a flat! The Hi-Lift Jack will lift up to 3 1/2 tons to a height of 48 inches . The 28 inch square base plate resists sinking into the ground, low pick-up of 4 1/2 inches from base, 4 inch lifting use for positive contact with load, top clamp/clevis adjustable for clamping, winching and hoisting operations. Steel bar of rolled high carbon steel with 80,000 lb. minimum tensile, climbing pins of processed steel with 125,000 psi tensile and 100,000 psi yield, for safety shear pin is designed to break when overloaded. Man-A-Fre now carries the heavy duty version of the Hi-Lift jack called the Casting Jack which utilizes all steel pieces for superior strength, and durability. Casting Jacks come in red as opposed to the weaker steel versions which come in blue or black, and features a top clamp-clevis with teeth for clamping operations. Stocked in 48 inch and 60 inch lengths.
MAN-A-FRE STRONGLY
RECOMMENDS YOU READ THE INFORMATION LISTED BELOW
PRICES SUBJECT TO CHANGE WITHOUT
NOTICE:
ONLINE ORDERS:
Copyright © 2002-08, TOYOTA", "LAND CRUISER" is a registered trademark of Toyota Motor Corporation. MAN-A-FRE is not affiliated with, or endorsed, sponsored, or supported by, Toyota Motor Corporation, Toyota Motor Sales, U.S.A., Inc. or any of Toyota's affiliated companies. These terms are used for descriptive purposes only, and not to denote affiliation or connection with Toyota Motor Corporation. |